PC TripleC Copper    Power Supply Related    RR-888    RTP Series Power Conditioners    C & Network Related  
​RGC-24 Ground Conditioner


RR-888 Ultra Low Frequency Generator
"...more detail, more space, better imaging and more musical communication."  Jeff Day Acoustic Revive Chronicles Chapter 3, 6moons.com
2009 SUMMER Visual Grand Prix
2008 6moons 'Blue Moon Award'
2008 Stereo Times 'Most Wanted Components Award'
2007 Audio Excellence Award Accessory Grand Prix & Top Prize in accessory category
Only available through authorized distributors

Principle and Structure

The ideal way to ground your high end equipment.

Even when proper grounding has been applied to a system, it is difficult to get an optimum result result due to low ground resistance. This could lead to a countercurrent of noise and radio signal entering the equipment. There is also the chance that ground loops and ham radio noise will affect the audio signal. The RGC-24 balances chassis current potential and eliminates electric field interference by means of its virtual ground environment. This stabilizes the circuit, improving the sound.

Inside the RGC-24 is a blend of natural minerals with negative current potential. Positive current potential and field noise from the equipment travels through the attached cable and into the RGC-24. Even in an environment where ground has already been properly established, sound quality can be improved by using the RGC-24.
Picture










Blend of ore in main body of the RGC-24
Picture
The attached cable uses the same structure as ACOUSTIC REVIVE's highest grade single core cables. The inner conductor is a 2.6mm x 2.2mm oval shaped PCOCC-A solid core with natural silk insulation, flexible Teflon coated copper conduit and carbon paper SF tube (CSP) for superior conductivity, powerful shielding and excellent sound quality.

A high-grade rhodium plated banana plug (RBN-1) is used going into the RGC and a gold plated spade lug is used for perfect conductivity going to the equipment.


Picture
If no ground terminal is available, connection via an RCA connector is possible

The supplied IP-2RGC-24 adapter has a threaded connection to accept the spade lug. The RCA type adaptor can then connect to an input terminal on your equipment.

Effect

By stabilizing the circuit using the RGC-24, S/N ratio and sound quality is vastly improved. There is a noticeable absence of blur yielding a powerfully expanded 3 dimensional sound stage and vastly improved dynamic range. 


Picture
Measurement proves the effect of the RGC-24

Radiation Technology's electric field strength meter, ELF-100E, was used to measure the strength of the electric field. The amount will vary depending on the equipment being measured, but there is a definite decrease in electric field strength when using the RGC-24. The system in this photograph, was measured 900V/m  before connecting RGC-24 and at 750V/m after.


The RGC-24 has a beneficial effect even where high quality grounding has already been done. Also, it never generates ground loops even when using 2 or more RGC-24s in a system.The more you use, the more the sound improves!
415-897-8884 • joe@lotusgroupusa.com